Hi,

   The last beta (v2.2.922) was released today, 23 May 2010, and is available [here]. Please take a look and let me know of any new bugs you find.

   A big "thank you" to all of the inputs I received for v2.2.921. You really helped.

   The official release is expected to occur on 31 May 2010.

   Best regards,

Michel

sorry: forget to make the URLs clickable

http://www.exp-systems.com/forum_exp/forum_posts.asp?TID=575

http://www.exp-systems.com/forum_exp/forum_posts.asp?TID=582

No worries.
Also apols about the terrible puncuation/typing/spelling: shouldn't do stuff late at night!
Thanks for adding the fixes back in.

In addition (and as an after-thought/on reflection):
when I installed beta 2.2.922 (on top of 2.2.921), I got an installation error:

==============

Sorry. An error occured while Installing new PDF reDirect Port Monitor......FAILED. (3006)
   - Error Number = 0:
   - DLL Error Number = 3006: The specified print monitor has already been installed.

This error may occur if the Windows Print Spooler is currently "BUSY".

You can try the following:
   1. Reboot your computer and then try installing again, or
   2. Restart the Print Spooler Service and then try installing again.

If the error persists, etc etc etc

==============

I didn't worry too much, clicked on Yes, did a reboot and it installed fine at the second attempt.
However, as soon as I clicked on Yes, I think there was a message about doing a clean up (went by too quickly to really notice, and not in the log files). But it seemed to have deleted the whole of the pre-existing 2.2.921 installation directory i.e. it didn't leave it in place/reinstate it, as it probably should have done since it couldn't put 2.2.922 in?
Happily, I have a backup, so could pull back a couple of files that I wanted.
When I got 2.2.922 on at the second attempt, all the settings & history etc were there, so they hadn't been lost.
It just seems a bit unusual that if an installation on top of an existing version fails, one would hope that the existing installation is left intact, and not deleted.
Just my thoughts, maybe that's the way it's supposed to happen, but just in case there's something not quite right, am posting this.

The text of the error log file is below; I have a copy of the error window (JPG), but the text is much the same.

Allan

------------------------------------------------------------

Command Line is: -p -i -l1033 -e
Language to use is: English
Resolve APPDATA Folder
Checking for PDF reDirect.
Removing Printer PDF reDirect Pro v2......DONE.
Attempting to remove old pdf reDirect Printer Driver......FOUND.
Warning: Could not remove the old PDF reDirect Printer Driver
Look for old pdf reDirect Port Monitor......FOUND.
Remove old pdf reDirect Port Monitor......NOT REMOVED. (3008)
Minor or Expected Error 75/3008

Delete old Port Monitor DLL......FAILED. (0)
Copy new pdf reDirect DLL......
Minor or Expected Error 70/0
Copy new pdf reDirect DLL......SUCCESS.
Installing new PDF reDirect Port Monitor......FAILED. (3006)
Error Occured as follows:
 - Error# =  0
 - DLLErr =  3006
***************************
*      ERROR MESSAGE      *
***************************
Sorry. An error occured while Installing new PDF reDirect Port Monitor......FAILED. (3006)
   - Error Number = 0:
   - DLL Error Number = 3006: The specified print monitor has already been installed.

This error may occur if the Windows Print Spooler is currently "BUSY".

You can try the following:
   1. Reboot your computer and then try installing again, or
   2. Restart the Print Spooler Service and then try installing again.

If the error persists, you may not have permission to install/remove printers. You can:
   1. Contact your computer administrator for help, or
   2. Visit the forum on our web site for help.

Do you want to visit our support forum for help on installation errors?
 
***************************
*       MEMORY DUMP       *
***************************
 
pData() As Byte =
 0 = 0
End pData()
 
MyDriverInfo3 As DRIVER_INFO_3
  .cVersion As Long =  0
  .pConfigFile As String =
  .pDataFile As String =
  .pDefaultDataType As String =
  .pDependentFiles As String =
  .pDriverPath As String =
  .pEnvironment As String =
  .pHelpFile As String =
  .pMonitorName As String =
  .PName As String =
End MyDriverInfo3
 
MyPrinterInfo2() As PRINTER_INFO_2
  Index = 0
    .pPrinterName As String =
    .pDriverName As String =
    .pServerName As String =
    .pShareName As String =
    .pPortName As String =
    .pLocation As String =
    .pComment As String =
  Index = 1
    .pPrinterName As String = Samsung ML-6060 Series PCL 6
    .pDriverName As String = Samsung ML-6060 Series PCL 6
    .pServerName As String =
    .pShareName As String = ML6060
    .pPortName As String = USB001
    .pLocation As String =
    .pComment As String = Samsung ML-6060 Series PCL 6
  Index = 2
    .pPrinterName As String = PDF reDirect Pro v2
    .pDriverName As String = PDF reDirect Pro
    .pServerName As String =
    .pShareName As String =
    .pPortName As String = PDF_REDIRECT_PORT:
    .pLocation As String =
    .pComment As String = PDF reDirect provided by EXP Systems
  Index = 3
    .pPrinterName As String = Microsoft XPS Document Writer
    .pDriverName As String = Microsoft XPS Document Writer
    .pServerName As String =
    .pShareName As String = Printer
    .pPortName As String = XPSPort:
    .pLocation As String =
    .pComment As String =
End MyPrinterInfo2()
 
MyMonitorInfo2 As MONITOR_INFO_2
  .pDLLName = PDFreDirectMonNT.dll
  .pEnvironment =
  .PName = PDF reDirect Monitor
End MyMonitorInfo2
 
MyPrinterDefaults4Delete As PRINTER_DEFAULTS4Delete
  .pDatatype As Long = 0
  .DesiredAccess As Long = 983052
End MyPrinterDefaults
 
OSInfo As OSVERSIONINFO
  .dwBuildNumber As Long = 2600
  .dwMajorVersion As Long = 5
  .dwMinorVersion As Long = 1
  .dwOSVersionInfoSize As Long = 148
  .dwPlatformId As Long = 2
  .szCSDVersion As String * 128 = Service Pack 3
End OSInfo
 
64bit CPU = 0
 
hPrinter As Long = 1517396
MyKey As String =
MyKeyString As String =
MyKeyValue As Long = 0
Result As Long = 0
MyError As String = Sorry. An error occured while Installing new PDF reDirect Port Monitor......FAILED. (3006)
   - Error Number = 0:
   - DLL Error Number = 3006: The specified print monitor has already been installed.

This error may occur if the Windows Print Spooler is currently "BUSY".

You can try the following:
   1. Reboot your computer and then try installing again, or
   2. Restart the Print Spooler Service and then try installing again.

If the error persists, you may not have permission to install/remove printers. You can:
   1. Contact your computer administrator for help, or
   2. Visit the forum on our web site for help.

Do you want to visit our support forum for help on installation errors?
Level As Long = 0
pNeeded As Long = 0
I As Long = 4
InstallPrinter As Boolean =  True
ShowErrors As Boolean =  True
System_Dir As String = C:\WINDOWS\system32\
MyUserAppPath As String = C:\Documents and Settings\Allan\Application Data\PDF reDirect\
Monitor_DLL_Name As String = PDFreDirectMonNT.dll
Printer_Driver_Dir As String = C:\Program Files\PDF reDirect\Drivers\Win 2K-XP\
System_Printer_Dir As String =
Generic Error Code as Long =  0
DLL Error Code as Long =  3006

The two items noted above
1. crash on attachment/add/cancel
2. defaulting to documents folder for adding attachments (& remembering lat used folder)
both work in beta 923
Thanks!